Top Quality Din1587 - Retaining rings for shafts Black Oxide Coating Din471 – Ruiye
Top Quality Din1587 - Retaining rings for shafts Black Oxide Coating Din471 – Ruiye Detail:
Available Sizes: 8 mm to 400 mm
Standard Material: Carbon Spring Steel
Standard Finish: Phosphate and oil
Open these rings, pass them over the end of a shaft, and release to spring into the groove. Ring ID is measured with the ring uninstalled. Use retaining ring pliers (sold separately) to install and remove rings.
Spring steel rings are an economical choice with good strength. A black-phosphate finish is mildly corrosion resistant in dry environments. In wet environments, zinc yellow-chromate plated finishes have some corrosion resistance, and zinc-chromate plated finishes have good corrosion resistance.
Thrust load capacity, also known as PR, is based on using a shaft that is harder than the ring.
SURFACE FINISHES :Phosphates and oiled Blackened and oiled Manufacturer's choice
Version:Phosphated spring steel.
Bright stainless steel.Note:DIN 471 circlips are retaining rings mounted in a groove on a shaft OD. They withstand high axial forces between machine elements (e.g. bearings) and the groove in which the ring is mounted.Drawing reference:
Tapered section retaining rings decrease symmetrically from the center to the free ends, remaining circular when contracted or expanded within the limits of normal use. This assures contact with the groove along the entire periphery of the ring. These rings may be installed axially (horizontally along the center point of an axis) or radially (externally along the radius of a circle). Depending on the size of the ring in question, it may be manufactured in one of two ways:
- For smaller rings: using a Die and stamping on a Press from a coil of steel or copper
- For larger rings: wire forming, in which rectangular wire is coiled into the shape of the ring.
We have a large inventory of retaining rings in stock for immediate shipment to save you time and money.
Other Product
Product detail pictures:
Related Product Guide:
Cooperation
we are able to provide good quality items, aggressive rate and best shopper assistance. Our destination is "You come here with difficulty and we provide you with a smile to take away" for Top Quality Din1587 - Retaining rings for shafts Black Oxide Coating Din471 – Ruiye , The product will supply to all over the world, such as: Saudi Arabia, Kenya, Irish, Now, we are trying to enter new markets where we do not have a presence and developing the markets we have the already penetrated. On account of superior quality and competitive price , we will be the market leader, please don’t hesitate to contact us by phone or email, if you are interested in any of our products.
By Emma from Costa Rica - 2017.12.31 14:53
As an international trading company, we have numerous partners, but about your company, I just want to say, you are really good, wide range, good quality, reasonable prices, warm and thoughtful service, advanced technology and equipment and workers have professional training, feedback and product update is timely, in short, this is a very pleasant cooperation, and we look forward to the next cooperation!
By Samantha from South Korea - 2017.04.18 16:45
Related products
-
Discount wholesale Slotted Spring Pin Hole Size...
Standard：Din914/Din915/Din916 Specification: M3-M20 or Custom Material: 35K,45#, 40Cr (SAE1045, 5140), SS304,SS316 Productive Process: Wire rod→Anneal→Acid cleaing→Draw wire→molding and rolling thread→Heat treatment→Surface treat →Packing Surface treat: Plain,Black oxide,Blue white zinc,Yellow zinc,Hot dip galvanized,Copper plating,Gold plating,Chromium Plating. Quality Control:Raw material inspect→process monitoring→Product test→Packaging check Certification: ISO9001:2008 Packaging:prod...
-
New Delivery for Carbon Steel Internal Retainin...
Standard：Din914/Din915/Din916 Specification: M3-M20 or Custom Material: 35K,45#, 40Cr (SAE1045, 5140), SS304,SS316 Productive Process: Wire rod→Anneal→Acid cleaing→Draw wire→molding and rolling thread→Heat treatment→Surface treat →Packing Surface treat: Plain,Black oxide,Blue white zinc,Yellow zinc,Hot dip galvanized,Copper plating,Gold plating,Chromium Plating. Quality Control:Raw material inspect→process monitoring→Product test→Packaging check Certification: ISO9001:2008 Packaging:prod...
-
Wholesale Discount Class10.9 Cap Nut - Galvani...
Eye Nut DIN582 with Galvanized Surface Carbon Steel Material Drop Forged Place of Origin:China Brand Name:RUIYE Product Name:Eye Nut Standard: DIN582 Mateial:Carbon Steel Sizes:M6-M64 Surface treatment:Galvanized Also Available in Stainless steel AISI304 AISI316,Polished,Hot Dipped Galvanized, Electro Galvanized, Color Painted etc. Color:Silver Application:Lifting Fittings Package:Polybag, carton or as per customer's requirements Special specifications can also be produced according to draw...
-
Fixed Competitive Price Hot Dip Galvanized Eye ...
Welding nut is a kind of nut suitable for welding outside the nut. It is generally made of weldable materials and is thick and suitable for welding. Welding is equivalent to turning two separate parts into one body. The metal is melted at high temperature and mixed After cooling down together, an alloy will be added in the middle. The internal force is the role of molecular force, and the strength is generally greater than the strength of the matrix. The experiment of welding parameter...
-
2019 wholesale price Self-Locking Counter Nut -...
high strength steel black and zinc plated hex long nut DIN6334 A nut is a type of fastener with a threaded hole. Nuts are almost always used in conjunction with a mating bolt to fasten multiple parts together. The two partners are kept together by a combination of their threads' friction (with slight elastic deformation), a slight stretching of the bolt, and compression of the parts to be held together. In applications where vibration or rotation may work a nut loose, various locking mecha...
-
Top Quality Din912 10.9 Grade Allen Bolt Black ...
U-shaped bolts are riding bolts Product Description The English name of the riding bolt is U-bolt. It is a non-standard part. The shape is U-shaped, so it is also called a U-bolt. Both ends have threads to be combined with nuts. They are mainly used to fix tubular objects such as water pipes. Or a sheet-like object, such as a leaf spring of a car, is called a riding bolt because it fixes things like a person rides on a horse. U type is generally used in trucks, it is used to stabilize t...
