Super Purchasing for Round Internal Retaining Rings - Spring Steel Phosphate External Snap Retaining Ring Washer DIn6799 manufacturer – Ruiye
Super Purchasing for Round Internal Retaining Rings - Spring Steel Phosphate External Snap Retaining Ring Washer DIn6799 manufacturer – Ruiye Detail:
Size:M8-M30
Samples: Samples is Free,
1.There is no MOQ,if the items are in stock.
2.Mixed orders and sample orders are also accepted
If any other questions,please email us or send your inquiry details in the bottom!
As we known as E-style rings, these rings have three prongs that make contact with the shaft and provide a wider shoulder than other external rings for a larger retaining surface. Use a side-mount retaining ring tool (sold separately) to push them into the groove from the side of the shaft. Ring OD is measured with the ring uninstalled.
Material: Spring steel
Hardness: 46÷54 HRC 
460÷580 HV
Note:E-type circlips are pushed into a groove on a shaft. They are DIN 6799 standard elements and are designed for use on small shafts.
Circular push-on retaining rings may be installed in applications where there is no groove.
Retaining rings are typically made from carbon steel, stainless steel or beryllium copper and may feature a variety of finishes for aesthetics and corrosion protection depending on the type of environment in which they are used.
These rings are equipped with assembly holes and are typically fitted and dismantled using special pliers. It is important to use the appropriate pliers as designed for each single ring. Please refer to the pliers data chart for the correct pliers/ring combination. If rings are over-expanded, elastic deformation of rings can occur during assembly. This leads to very high bending stresses, so it is important to note:
During assembly, a ring should be expanded or closed only to the extent necessary to pass over the shaft or into the bore. The shaft and bore must be of the same nominal diameter as the ring.
Contact US: Skype/WhatsApp: +8618833059594 WeChat：+8618713913345
Application :Apply in the axial trough of the machine or equipment in order to avoid the axial movement of shaft parts
Product detail pictures:
Related Product Guide:
Cooperation
"Sincerity, Innovation, Rigorousness, and Efficiency" is definitely the persistent conception of our corporation to the long-term to establish alongside one another with customers for mutual reciprocity and mutual profit for Super Purchasing for Round Internal Retaining Rings - Spring Steel Phosphate External Snap Retaining Ring Washer DIn6799 manufacturer – Ruiye , The product will supply to all over the world, such as: Muscat, New Orleans, Cancun, We now have established long-term, stable and good business relationships with many manufacturers and wholesalers around the world. Currently, we've been looking forward to even greater cooperation with overseas customers based on mutual benefits. You should feel free to contact us for more details.
By Kay from Iran - 2018.11.22 12:28
The customer service staff's answer is very meticulous, the most important is that the product quality is very good, and packaged carefully, shipped quickly!
By Kay from Munich - 2018.06.19 10:42
Related products
-
High definition Foundation Sleeve Anchor Bolt -...
Galvanized M8-M20 Wedge Anchor, yellow zinc or white zinc, all size in stock Details The anchor is manufactured with a zinc plated carbon steel body and expansion clip for premium performance. Nut and washer are included. The one piece clip is formed around anchor , assuring full expansion for dependable , superior holding power. Expanding clip will not fall off in the hole . This product is designed for consistent performance in cracked and uncracked concrete. Suitable base materials i...
-
Factory Price For High-Quality Cap Nut - China...
An acorn nut, also referred to as crown hex nut, blind nut, cap nut, domed cap nut, or dome nut (UK), is a nut that has a domed end on one side. When used together with a threaded fastener with an external male thread, the domed end encloses the external thread, either to protect the thread or to protect nearby objects from contact with the thread. In addition, the dome gives a more finished appearance. Acorn nuts are usually made of brass, steel, stainless steel (low carbon content) or nylon...
-
Factory Cheap Hot Din6921 Bolt - DIN 933/931 G...
Steel Hex Head Bolt Product Description DIN933 is a German standard bolt with specifications from M1.6 to M52 and a length from 2mm to 200mm. Bolts: mechanical parts, cylindrical threaded fasteners with nuts. A type of fastener consisting of a head and a screw (a cylinder with external threads), which need to cooperate with a nut to fasten and connect two parts with through holes. This type of connection is called a bolted connection. If the nut is unscrewed from the bolt, the two part...
-
Quality Inspection for Concrete Steel Nail - S...
We supply different sizes and type self tapping screw. Stainless steel or galvanized carbon steel material. All kinds of diameter and length for customers to choose. Self Tapping Screw: Self-tapping screws have a wide range of tip and thread patterns, and are available with almost any possible screw head design. Common features are the screw thread covering the whole length of the screw from tip to head and a pronounced thread hard enough for the intended substrate, often case-hardened. For ...
-
Hot New Products Spring Lock Washers - DIN127 ...
Product Description Product name DIN127 steel spring washers spring lock washers Size M2-M30, can be customized Standard ISO,GB,DIN,BS,ANSI, JIS,Nonstandard Grade 4.8/ 6.8/ 8.8/ 10.9/ 12.9 Available Material 1. Stainless Steel: SS201, SS303, SS304, SS316, SS410, SS420 2. Steel: C45(K1045), C46(K1046), C20,etc. 3. Brass: C36000 ( C26800), C37700 ( HPb59), C38500( HPb58), C27200CuZn37), C28000(CuZn40),etc. 4. Bronze: C51000, C52100, C54400, etc. 5. Iron: 1213, 12L14, 1215, e...
-
OEM Customized Din11023 - Retaining rings for ...
Available Sizes: 8 mm to 400 mm Standard Material: Carbon Spring Steel Standard Finish: Phosphate and oil Open these rings, pass them over the end of a shaft, and release to spring into the groove. Ring ID is measured with the ring uninstalled. Use retaining ring pliers (sold separately) to install and remove rings. Spring steel rings are an economical choice with good strength. A black-phosphate finish is mildly corrosion resistant in dry environments. In wet environments, zinc yellow-chroma...
