professional factory for Spring-Type Coiled Parallel Pins - Retaining rings for shafts Black Oxide Coating Din471 – Ruiye
professional factory for Spring-Type Coiled Parallel Pins - Retaining rings for shafts Black Oxide Coating Din471 – Ruiye Detail:
Available Sizes: 8 mm to 400 mm
Standard Material: Carbon Spring Steel
Standard Finish: Phosphate and oil
Open these rings, pass them over the end of a shaft, and release to spring into the groove. Ring ID is measured with the ring uninstalled. Use retaining ring pliers (sold separately) to install and remove rings.
Spring steel rings are an economical choice with good strength. A black-phosphate finish is mildly corrosion resistant in dry environments. In wet environments, zinc yellow-chromate plated finishes have some corrosion resistance, and zinc-chromate plated finishes have good corrosion resistance.
Thrust load capacity, also known as PR, is based on using a shaft that is harder than the ring.
SURFACE FINISHES :Phosphates and oiled Blackened and oiled Manufacturer's choice
Version:Phosphated spring steel.
Bright stainless steel.Note:DIN 471 circlips are retaining rings mounted in a groove on a shaft OD. They withstand high axial forces between machine elements (e.g. bearings) and the groove in which the ring is mounted.Drawing reference:
Tapered section retaining rings decrease symmetrically from the center to the free ends, remaining circular when contracted or expanded within the limits of normal use. This assures contact with the groove along the entire periphery of the ring. These rings may be installed axially (horizontally along the center point of an axis) or radially (externally along the radius of a circle). Depending on the size of the ring in question, it may be manufactured in one of two ways:
- For smaller rings: using a Die and stamping on a Press from a coil of steel or copper
- For larger rings: wire forming, in which rectangular wire is coiled into the shape of the ring.
We have a large inventory of retaining rings in stock for immediate shipment to save you time and money.
Other Product
Product detail pictures:
Related Product Guide:
Cooperation
Attaining consumer satisfaction is our firm's purpose for good. We'll make wonderful efforts to produce new and top-quality merchandise, meet up with your special necessities and supply you with pre-sale, on-sale and after-sale products and services for professional factory for Spring-Type Coiled Parallel Pins - Retaining rings for shafts Black Oxide Coating Din471 – Ruiye , The product will supply to all over the world, such as: Wellington, Cologne, Florida, We will supply much better products with diversified designs and professional services. We sincerely welcome friends from over the world to visit our company and cooperate with us on the basis of long-term and mutual benefits.
By Heloise from Curacao - 2017.10.13 10:47
Cooperate with you every time is very successful, very happy. Hope that we can have more cooperation!
By Roland Jacka from Slovak Republic - 2017.05.02 11:33
Related products
-
OEM manufacturer Din1587 Cap Nut - Galvanized ...
Eye Nut DIN582 with Galvanized Surface Carbon Steel Material Drop Forged Place of Origin:China Brand Name:RUIYE Product Name:Eye Nut Standard: DIN582 Mateial:Carbon Steel Sizes:M6-M64 Surface treatment:Galvanized Also Available in Stainless steel AISI304 AISI316,Polished,Hot Dipped Galvanized, Electro Galvanized, Color Painted etc. Color:Silver Application:Lifting Fittings Package:Polybag, carton or as per customer's requirements Special specifications can also be produced according to draw...
-
China Factory for Din985 - Yellow Zinc Plated ...
Linch pin: DIN11023, linch pin, Wire Lock Pins, lock pin Pins Material: Carbon Steel / Stainless Steel Wires Material: Spring Steel Surface treatment: Yellow zinc plated, zinc plated, plain, Reference M range: M4.5-M12 Reference Length: 30mm-90mm All size or produce according with your request Linch pins are commonly used in the agricultural industry for securing implements onto the three point hitch of a. Linch pins may also be used in place of an for securing hitch pins The safety ...
-
Best Price on Good Quality Fashion New Sleeve A...
Galvanized M8-M20 Wedge Anchor, yellow zinc or white zinc, all size in stock Product Description Drop in anchor bolts is also known as implosion, which a small steel columns inside it, female cap thread in the end, screwed into the drilled hole in the wall, the small steel columns are constantly squeezed, the head burst open to generated frictional force with wall, fix into the wall solidly. The materials are stainless steel, carbon steel and other metal materials. Application for fixin...
-
100% Original Black Oil Hex Bolt And Nut - DIN...
Carriage Bolts 316 Stainless Steel Product Description Carriage bolts are divided into large round head carriage bolts (corresponding to standard GB / T14 and DIN603) and small round head carriage bolts (corresponding to standard GB / T12-85) according to head size. A carriage bolt, a type of fastener consisting of a head and a screw (a cylinder with external threads), needs to cooperate with a nut to fasten two parts with through holes. Generally speaking, bolts are used to connect tw...
-
OEM Manufacturer Round Head Screw - Self Tappi...
We supply different sizes and type self tapping screw. Stainless steel or galvanized carbon steel material. All kinds of diameter and length for customers to choose. Self Tapping Screw: Self-tapping screws have a wide range of tip and thread patterns, and are available with almost any possible screw head design. Common features are the screw thread covering the whole length of the screw from tip to head and a pronounced thread hard enough for the intended substrate, often case-hardened. For ...
-
Factory Price Thread Spring Nut - China manufa...
An acorn nut, also referred to as crown hex nut, blind nut, cap nut, domed cap nut, or dome nut (UK), is a nut that has a domed end on one side. When used together with a threaded fastener with an external male thread, the domed end encloses the external thread, either to protect the thread or to protect nearby objects from contact with the thread. In addition, the dome gives a more finished appearance. Acorn nuts are usually made of brass, steel, stainless steel (low carbon content) or nylon...
