OEM/ODM Factory E Shaft Washer Din6779 - Retaining rings for shafts Black Oxide Coating Din471 – Ruiye
OEM/ODM Factory E Shaft Washer Din6779 - Retaining rings for shafts Black Oxide Coating Din471 – Ruiye Detail:
Available Sizes: 8 mm to 400 mm
Standard Material: Carbon Spring Steel
Standard Finish: Phosphate and oil
Open these rings, pass them over the end of a shaft, and release to spring into the groove. Ring ID is measured with the ring uninstalled. Use retaining ring pliers (sold separately) to install and remove rings.
Spring steel rings are an economical choice with good strength. A black-phosphate finish is mildly corrosion resistant in dry environments. In wet environments, zinc yellow-chromate plated finishes have some corrosion resistance, and zinc-chromate plated finishes have good corrosion resistance.
Thrust load capacity, also known as PR, is based on using a shaft that is harder than the ring.
SURFACE FINISHES :Phosphates and oiled Blackened and oiled Manufacturer's choice
Version:Phosphated spring steel.
Bright stainless steel.Note:DIN 471 circlips are retaining rings mounted in a groove on a shaft OD. They withstand high axial forces between machine elements (e.g. bearings) and the groove in which the ring is mounted.Drawing reference:
Tapered section retaining rings decrease symmetrically from the center to the free ends, remaining circular when contracted or expanded within the limits of normal use. This assures contact with the groove along the entire periphery of the ring. These rings may be installed axially (horizontally along the center point of an axis) or radially (externally along the radius of a circle). Depending on the size of the ring in question, it may be manufactured in one of two ways:
- For smaller rings: using a Die and stamping on a Press from a coil of steel or copper
- For larger rings: wire forming, in which rectangular wire is coiled into the shape of the ring.
We have a large inventory of retaining rings in stock for immediate shipment to save you time and money.
Other Product
Product detail pictures:
Related Product Guide:
Cooperation
No matter new customer or previous client, We believe in prolonged time period and trustworthy relationship for OEM/ODM Factory E Shaft Washer Din6779 - Retaining rings for shafts Black Oxide Coating Din471 – Ruiye , The product will supply to all over the world, such as: Montpellier, Naples, Milan, We guarantee that our company will try our best to reduce customer purchase cost , shorten the period of purchase , stable products quality , increase customers' satisfaction and achieve win-win situation .
By Bernice from Hanover - 2017.03.08 14:45
This is a very professional and honest Chinese supplier, from now on we fell in love with the Chinese manufacturing.
By Chloe from Guinea - 2017.10.13 10:47
Related products
-
Good Wholesale Vendors Stainless Steel Drop In ...
Fish Scale Anchor Factory supply competitive price yellow zinc plated Scale Anchor Main Features It is a one tyoe of expansion anchor bolt. Size: M6-M12 avaliable Quality: Grate Grade: 4.8 Color: yellow or white color Usage: concrete, natural hard stone, fire equipment, air conditioner, exhaust duct, upside-down tube,curtain wall and ceiling etc. 1.Materials Our company has purchased steel from several large steel groups, such as Shougang Steel Mill, Handan Steel Mills whose steel have...
-
8 Year Exporter Stainless Steel Self Tapping Sc...
Screw: A screw is a type of fastener, in some ways similar to a bolt , typically made of metal, and characterized by a helical ridge, known as a male thread (external thread). Screws are used to fasten materials by digging in and wedging into a material when turned, while the thread cuts grooves in the fastened material that may help pull fastened materials together and prevent pull-out. There are many screws for a variety of materials; those commonly fastened by screws include wood, sheet me...
-
Manufacturer of 60pk Drywall Screw - Hot Sale ...
Can you nail into concrete? Using concrete nails to nail boards into concrete slabs can be an inexpensive project when you do it manually. With just a hammer drill, masonry bit, concrete nails, and a hammer, you can accomplish roughly the same feat as you would by using a gun-style power nailer. Concrete Nail: Uses: Suitable for the connection of decoration, decoration industry, hard wood, light wood keel. Suitable for hard wood, brick wall and cement mortar components. It is widely u...
-
China Manufacturer for Heavy Duty External Reta...
DIN6885 Parallel Pins Carbon Steel Flat Key 1) Material: carbon steel, stainless steel 2) Standard: DIN6885 3) Size: M6-M36 4) Surface treatment: natural color Keys DIN 6885 with loosening screw for combination shell end mill adapters About US Our company founded in 1998, is a set design, development, production, sale as a whole, professional production and operation of various types of industrial fasteners. Company provides: National standard (GB), British standard (BS), German standard (...
-
Quality Inspection for Stainless Steel 304 Reta...
Certificate: ISO9001;SGS,3-1 CERTIFICATES Standard: DIN1481 GB879 ISO8752 Size: M0.5-M30 or And we also can customized for you, if you have special requirement. Class or Grade: Class/grade 4,5,6,8,10,12,SUS201,SUS304, Material: 1.Carbon Steel:C1008/C1010/C1015/C1030/1035/1045/40CR 2. Stainless Steel: AISI304,AISI316,AISI316L Finishing: 1.Plain or Protective oil. 2.Zinc Plated:Write,Black,Blue,Yellow,CR3+,CR+6 3.Chrome,H.D.G,Nickel Packing:Normal ...
-
OEM Supply Din6799 Retaining Rings For Shafts E...
Size:M8-M30 Samples: Samples is Free, 1.There is no MOQ,if the items are in stock. 2.Mixed orders and sample orders are also accepted If any other questions,please email us or send your inquiry details in the bottom! As we known as E-style rings, these rings have three prongs that make contact with the shaft and provide a wider shoulder than other external rings for a larger retaining surface. Use a side-mount retaining ring tool (sold separately) to push them into the groove from the side ...
