Factory Price For Hot Dip Galvanized Hex Bolt M12 Grade8.8 - DIN 603 Carriage Bolt – Ruiye
Factory Price For Hot Dip Galvanized Hex Bolt M12 Grade8.8 - DIN 603 Carriage Bolt – Ruiye Detail:
Carriage Bolts 316 Stainless Steel
Product Description
Carriage bolts are divided into large round head carriage bolts (corresponding to standard GB / T14 and DIN603) and small round head carriage bolts (corresponding to standard GB / T12-85) according to head size. A carriage bolt, a type of fastener consisting of a head and a screw (a cylinder with external threads), needs to cooperate with a nut to fasten two parts with through holes.
Generally speaking, bolts are used to connect two objects, usually through a light hole, and need to be used in conjunction with a nut. A single connection does not work. The tool is generally a wrench. The head is mostly hexagonal, etc., and is generally larger. The carriage bolt is applied in the slot. The square neck is caught in the slot during installation, which can prevent the bolt from rotating, and the carriage bolt can move in parallel in the slot. Because the head of the carriage bolt is round, there is no design of cross-slots or inner hexagonal available power tools, and it can also play a role in preventing theft during the actual connection process.
Material: carbon steel, Q235, 45 # steel, stainless steel
Nominal diameter: 5mm--20mm
Length: 15mm--300mm
Surface treatment method: galvanized, chrome-plated, copper-plated, surface blackened
Standard
Stainless steel round head square neck bolts (carriage bolts) specifications: German standard DIN603
Specification for stainless steel small round head square neck carriage bolt: GB / T12-85
Specification for stainless steel big round head square neck carriage bolt: GB GB / T14-8
Use
Carriage bolts are generally used for the marble installation of dry hanging parts. When tightened, the bolt rod will not rotate due to the square neck effect, which is convenient for fixing and installation. It is mainly used in some places where countersunk screws are required.
Product Display
Product detail pictures:
Related Product Guide:
Cooperation
With a positive and progressive attitude to customer's interest, our company continuously improves our product quality to meet the needs of customers and further focuses on safety, reliability, environmental requirements, and innovation of Factory Price For Hot Dip Galvanized Hex Bolt M12 Grade8.8 - DIN 603 Carriage Bolt – Ruiye , The product will supply to all over the world, such as: France, Birmingham, Indonesia, Due to our good products and services, we have received good reputation and credibility from local and international customers. If you need more information and are interested in any of our products, please feel free to contact us. We look forward to becoming your supplier in the near future.
By Nora from Poland - 2017.03.28 16:34
We always believe that the details decides the company's product quality, in this respect, the company conform our requirements and the goods are meet our expectations.
By Edwina from Burundi - 2017.09.29 11:19
Related products
-
One of Hottest for Grade 8.8 Din 933 Din 931 Hi...
Stainless Steel Socket Head Cap Screw Product Description Hexagon socket head screws, also referred to as hexagon socket head bolts, cup head screws and hexagon socket head screws, are called differently, but they mean the same. Generally used hexagon socket head screws are 4.8, 8.8, 10.9, and 12.9. Also called hexagon socket screw, also called hexagon socket bolt. Its head is a hexagonal head and also a cylindrical head. There are stainless steel and iron by material. Stainless steel ha...
-
Factory Supply Metric Wedge Anchor Bolts - Dro...
Galvanized M8-M20 Wedge Anchor, yellow zinc or white zinc, all size in stock Product Description Drop in anchor bolts is also known as implosion, which a small steel columns inside it, female cap thread in the end, screwed into the drilled hole in the wall, the small steel columns are constantly squeezed, the head burst open to generated frictional force with wall, fix into the wall solidly. The materials are stainless steel, carbon steel and other metal materials. Application for fixin...
-
factory low price Light Duty Slotted Spring Pin...
Seeger-Rings for shafts and bores are the most common retaining rings. These rings provide the most favorable solution with respect to thickness and radial width. They transfer large axial forces from the located mating component onto the groove wall. The external rings can also be used for relatively higher shaft rotational speeds. Material：Phosphated spring steel Bright stainless steel. Applications: Mechanical engineering Automotive engineering Gear systems Electrical engineering Precisi...
-
Super Lowest Price Din929 Hexagon Weld Nuts - ...
high strength steel black and zinc plated hex long nut DIN6334 A nut is a type of fastener with a threaded hole. Nuts are almost always used in conjunction with a mating bolt to fasten multiple parts together. The two partners are kept together by a combination of their threads' friction (with slight elastic deformation), a slight stretching of the bolt, and compression of the parts to be held together. In applications where vibration or rotation may work a nut loose, various locking mecha...
-
Chinese Professional Lock Nuts - DIN 929 Hex w...
Welding nut is a kind of nut suitable for welding outside the nut. It is generally made of weldable materials and is thick and suitable for welding. Welding is equivalent to turning two separate parts into one body. The metal is melted at high temperature and mixed After cooling down together, an alloy will be added in the middle. The internal force is the role of molecular force, and the strength is generally greater than the strength of the matrix. The experiment of welding parameter...
-
Factory Cheap Hot Socket Cap Screw - Black Pho...
Drywall screw with black or gray color we can provide. Drywall Screw Introduction Its biggest feature in appearance is the shape of the horn, which is divided into two-line thin-tooth dry-wall screws and single-line thick-tooth dry-wall screws. The biggest difference between the two is the former. The thread is a double thread, suitable for the connection between gypsum board and metal keel with a thickness not exceeding 0.8mm, while the latter is suitable for the connection between gypsum b...
