China Gold Supplier for Quality Retaining Ring - Spring Steel Phosphate External Snap Retaining Ring Washer DIn6799 manufacturer – Ruiye
China Gold Supplier for Quality Retaining Ring - Spring Steel Phosphate External Snap Retaining Ring Washer DIn6799 manufacturer – Ruiye Detail:
Size:M8-M30
Samples: Samples is Free,
1.There is no MOQ,if the items are in stock.
2.Mixed orders and sample orders are also accepted
If any other questions,please email us or send your inquiry details in the bottom!
As we known as E-style rings, these rings have three prongs that make contact with the shaft and provide a wider shoulder than other external rings for a larger retaining surface. Use a side-mount retaining ring tool (sold separately) to push them into the groove from the side of the shaft. Ring OD is measured with the ring uninstalled.
Material: Spring steel
Hardness: 46÷54 HRC 
460÷580 HV
Note:E-type circlips are pushed into a groove on a shaft. They are DIN 6799 standard elements and are designed for use on small shafts.
Circular push-on retaining rings may be installed in applications where there is no groove.
Retaining rings are typically made from carbon steel, stainless steel or beryllium copper and may feature a variety of finishes for aesthetics and corrosion protection depending on the type of environment in which they are used.
These rings are equipped with assembly holes and are typically fitted and dismantled using special pliers. It is important to use the appropriate pliers as designed for each single ring. Please refer to the pliers data chart for the correct pliers/ring combination. If rings are over-expanded, elastic deformation of rings can occur during assembly. This leads to very high bending stresses, so it is important to note:
During assembly, a ring should be expanded or closed only to the extent necessary to pass over the shaft or into the bore. The shaft and bore must be of the same nominal diameter as the ring.
Contact US: Skype/WhatsApp: +8618833059594 WeChat：+8618713913345
Application :Apply in the axial trough of the machine or equipment in order to avoid the axial movement of shaft parts
Product detail pictures:
Related Product Guide:
Cooperation
To be a result of ours specialty and repair consciousness, our corporation has won a good popularity amid consumers everywhere in the environment for China Gold Supplier for Quality Retaining Ring - Spring Steel Phosphate External Snap Retaining Ring Washer DIn6799 manufacturer – Ruiye , The product will supply to all over the world, such as: Comoros, United Arab Emirates, Tunisia, As an experienced manufacturer we also accept customized order and we could make it the same as your picture or sample specification. The main goal of our company is to live a satisfactory memory to all the customers, and establish a long term business relationship with buyers and users all over the world.
By Christina from Armenia - 2017.01.28 19:59
Sales manager is very enthusiastic and professional, gave us a great concessions and product quality is very good,thank you very much!
By Coral from Slovakia - 2017.03.28 16:34
Related products
-
Professional China Sds Screw - Black Phosphate...
Drywall screw with black or gray color we can provide. Drywall Screw Introduction Its biggest feature in appearance is the shape of the horn, which is divided into two-line thin-tooth dry-wall screws and single-line thick-tooth dry-wall screws. The biggest difference between the two is the former. The thread is a double thread, suitable for the connection between gypsum board and metal keel with a thickness not exceeding 0.8mm, while the latter is suitable for the connection between gypsum b...
-
High Quality Din571 - Hexagon socket set screw...
Standard：Din914/Din915/Din916 Specification: M3-M20 or Custom Material: 35K,45#, 40Cr (SAE1045, 5140), SS304,SS316 Productive Process: Wire rod→Anneal→Acid cleaing→Draw wire→molding and rolling thread→Heat treatment→Surface treat →Packing Surface treat: Plain,Black oxide,Blue white zinc,Yellow zinc,Hot dip galvanized,Copper plating,Gold plating,Chromium Plating. Quality Control:Raw material inspect→process monitoring→Product test→Packaging check Certification: ISO9001:2008 Packaging:prod...
-
Short Lead Time for Din7967 - Yellow Zinc Plat...
Linch pin: DIN11023, linch pin, Wire Lock Pins, lock pin Pins Material: Carbon Steel / Stainless Steel Wires Material: Spring Steel Surface treatment: Yellow zinc plated, zinc plated, plain, Reference M range: M4.5-M12 Reference Length: 30mm-90mm All size or produce according with your request Linch pins are commonly used in the agricultural industry for securing implements onto the three point hitch of a. Linch pins may also be used in place of an for securing hitch pins The safety ...
-
OEM/ODM Manufacturer Din 582 Lifting Eye Nut -...
high strength steel black and zinc plated hex long nut DIN6334 A nut is a type of fastener with a threaded hole. Nuts are almost always used in conjunction with a mating bolt to fasten multiple parts together. The two partners are kept together by a combination of their threads' friction (with slight elastic deformation), a slight stretching of the bolt, and compression of the parts to be held together. In applications where vibration or rotation may work a nut loose, various locking mecha...
-
Hot New Products Spring Lock Washers - DIN127 ...
Product Description Product name DIN127 steel spring washers spring lock washers Size M2-M30, can be customized Standard ISO,GB,DIN,BS,ANSI, JIS,Nonstandard Grade 4.8/ 6.8/ 8.8/ 10.9/ 12.9 Available Material 1. Stainless Steel: SS201, SS303, SS304, SS316, SS410, SS420 2. Steel: C45(K1045), C46(K1046), C20,etc. 3. Brass: C36000 ( C26800), C37700 ( HPb59), C38500( HPb58), C27200CuZn37), C28000(CuZn40),etc. 4. Bronze: C51000, C52100, C54400, etc. 5. Iron: 1213, 12L14, 1215, e...
-
OEM/ODM China Theaded Bar - Threaded Rod/Stud ...
Thread rod DIN975, stainless steel 201 304 316 full thread stud bolt supplier. 1m 2m 3m different length with different diameter. Color: silver/blue white Packing detail: Product bulk in plastic bag→Wood pallet; Delivery: By air, by sea or by express service Payment terms: T/T, Western union What is thread rod? A threaded rod, also known as a stud, is a relatively long rod that is threaded on both ends; the thread may extend along the complete length of the rod. They are designed to be us...
