China Gold Supplier for Quality Retaining Ring - Retaining rings for shafts Black Oxide Coating Din471 – Ruiye
China Gold Supplier for Quality Retaining Ring - Retaining rings for shafts Black Oxide Coating Din471 – Ruiye Detail:
Available Sizes: 8 mm to 400 mm
Standard Material: Carbon Spring Steel
Standard Finish: Phosphate and oil
Open these rings, pass them over the end of a shaft, and release to spring into the groove. Ring ID is measured with the ring uninstalled. Use retaining ring pliers (sold separately) to install and remove rings.
Spring steel rings are an economical choice with good strength. A black-phosphate finish is mildly corrosion resistant in dry environments. In wet environments, zinc yellow-chromate plated finishes have some corrosion resistance, and zinc-chromate plated finishes have good corrosion resistance.
Thrust load capacity, also known as PR, is based on using a shaft that is harder than the ring.
SURFACE FINISHES :Phosphates and oiled Blackened and oiled Manufacturer's choice
Version:Phosphated spring steel.
Bright stainless steel.Note:DIN 471 circlips are retaining rings mounted in a groove on a shaft OD. They withstand high axial forces between machine elements (e.g. bearings) and the groove in which the ring is mounted.Drawing reference:
Tapered section retaining rings decrease symmetrically from the center to the free ends, remaining circular when contracted or expanded within the limits of normal use. This assures contact with the groove along the entire periphery of the ring. These rings may be installed axially (horizontally along the center point of an axis) or radially (externally along the radius of a circle). Depending on the size of the ring in question, it may be manufactured in one of two ways:
- For smaller rings: using a Die and stamping on a Press from a coil of steel or copper
- For larger rings: wire forming, in which rectangular wire is coiled into the shape of the ring.
We have a large inventory of retaining rings in stock for immediate shipment to save you time and money.
Other Product
Product detail pictures:
Related Product Guide:
Cooperation
Our firm aims to operating faithfully, serving to all of our shoppers , and working in new technology and new machine consistently for China Gold Supplier for Quality Retaining Ring - Retaining rings for shafts Black Oxide Coating Din471 – Ruiye , The product will supply to all over the world, such as: Provence, Swiss, Nicaragua, Although continuous opportunity, we have now developed serious a friendly relationship with many oversea merchants, such as ones through Virginia. We securely assume that the merchandise regarding t shirt printer machine is often good through a great number of having its good quality and also cost.
By Julia from Croatia - 2018.05.13 17:00
This enterprise in the industry is strong and competitive, advancing with the times and develop sustainable, we are very pleased to have a opportunity to cooperate!
By Abigail from India - 2018.10.01 14:14
Related products
-
Factory wholesale China Supply Wing Nut - DIN6...
high strength steel black and zinc plated hex long nut DIN6334 A nut is a type of fastener with a threaded hole. Nuts are almost always used in conjunction with a mating bolt to fasten multiple parts together. The two partners are kept together by a combination of their threads' friction (with slight elastic deformation), a slight stretching of the bolt, and compression of the parts to be held together. In applications where vibration or rotation may work a nut loose, various locking mecha...
-
PriceList for Din472 Black Internal Retaining R...
Seeger-Rings for shafts and bores are the most common retaining rings. These rings provide the most favorable solution with respect to thickness and radial width. They transfer large axial forces from the located mating component onto the groove wall. The external rings can also be used for relatively higher shaft rotational speeds. Material：Phosphated spring steel Bright stainless steel. Applications: Mechanical engineering Automotive engineering Gear systems Electrical engineering Precisi...
-
PriceList for 3 Pcs For Anchor Bolts - Expansi...
Korean anchor bolt Product Description The Sleeve Anchor is constructed of high quality steel parts. Each part is zinc plated and assembled into a complete ready-to-use anchor. The anchor consists of a threaded stud with an outwardly flared cone-shaped end. A tubular expander sleeve is assembled over the stud and butted against the small diameter of the cone. A washer and hex nut are then assembled on the stud to complete the anchor. The anchor works on a true expansion principle: Tighte...
-
Fixed Competitive Price Ss Polishing Din 7967 -...
Certificate: ISO9001;SGS,3-1 CERTIFICATES Standard: DIN1481 GB879 ISO8752 Size: M0.5-M30 or And we also can customized for you, if you have special requirement. Class or Grade: Class/grade 4,5,6,8,10,12,SUS201,SUS304, Material: 1.Carbon Steel:C1008/C1010/C1015/C1030/1035/1045/40CR 2. Stainless Steel: AISI304,AISI316,AISI316L Finishing: 1.Plain or Protective oil. 2.Zinc Plated:Write,Black,Blue,Yellow,CR3+,CR+6 3.Chrome,H.D.G,Nickel Packing:Normal ...
-
2019 China New Design T Bolt - DIN 933/931 Gal...
Steel Hex Head Bolt Product Description DIN933 is a German standard bolt with specifications from M1.6 to M52 and a length from 2mm to 200mm. Bolts: mechanical parts, cylindrical threaded fasteners with nuts. A type of fastener consisting of a head and a screw (a cylinder with external threads), which need to cooperate with a nut to fasten and connect two parts with through holes. This type of connection is called a bolted connection. If the nut is unscrewed from the bolt, the two part...
-
Good User Reputation for Carbon Steel Hex Nylon...
An acorn nut, also referred to as crown hex nut, blind nut, cap nut, domed cap nut, or dome nut (UK), is a nut that has a domed end on one side. When used together with a threaded fastener with an external male thread, the domed end encloses the external thread, either to protect the thread or to protect nearby objects from contact with the thread. In addition, the dome gives a more finished appearance. Acorn nuts are usually made of brass, steel, stainless steel (low carbon content) or nylon...
