China Factory for Din985 - Retaining rings for shafts Black Oxide Coating Din471 – Ruiye
China Factory for Din985 - Retaining rings for shafts Black Oxide Coating Din471 – Ruiye Detail:
Available Sizes: 8 mm to 400 mm
Standard Material: Carbon Spring Steel
Standard Finish: Phosphate and oil
Open these rings, pass them over the end of a shaft, and release to spring into the groove. Ring ID is measured with the ring uninstalled. Use retaining ring pliers (sold separately) to install and remove rings.
Spring steel rings are an economical choice with good strength. A black-phosphate finish is mildly corrosion resistant in dry environments. In wet environments, zinc yellow-chromate plated finishes have some corrosion resistance, and zinc-chromate plated finishes have good corrosion resistance.
Thrust load capacity, also known as PR, is based on using a shaft that is harder than the ring.
SURFACE FINISHES :Phosphates and oiled Blackened and oiled Manufacturer's choice
Version:Phosphated spring steel.
Bright stainless steel.Note:DIN 471 circlips are retaining rings mounted in a groove on a shaft OD. They withstand high axial forces between machine elements (e.g. bearings) and the groove in which the ring is mounted.Drawing reference:
Tapered section retaining rings decrease symmetrically from the center to the free ends, remaining circular when contracted or expanded within the limits of normal use. This assures contact with the groove along the entire periphery of the ring. These rings may be installed axially (horizontally along the center point of an axis) or radially (externally along the radius of a circle). Depending on the size of the ring in question, it may be manufactured in one of two ways:
- For smaller rings: using a Die and stamping on a Press from a coil of steel or copper
- For larger rings: wire forming, in which rectangular wire is coiled into the shape of the ring.
We have a large inventory of retaining rings in stock for immediate shipment to save you time and money.
Other Product
Product detail pictures:
Related Product Guide:
Cooperation
We have been proud from the higher consumer gratification and wide acceptance due to our persistent pursuit of high quality both on product or service and service for China Factory for Din985 - Retaining rings for shafts Black Oxide Coating Din471 – Ruiye , The product will supply to all over the world, such as: Mexico, Sevilla, Albania, Our company insists on the purpose of "takes service priority for standard, quality guarantee for the brand, do business in good faith, to provide professional, rapid, accurate and timely service for you". We welcome old and new customers to negotiate with us. We will serve you with all sincerity!
By Andy from Cancun - 2018.11.06 10:04
In China, we have purchased many times, this time is the most successful and most satisfactory, a sincere and realiable Chinese manufacturer!
By Nainesh Mehta from Nepal - 2017.08.15 12:36
Related products
-
Wholesale Price China Din975 Zinc Plated Thread...
Size:M8-M30 Samples: Samples is Free, 1.There is no MOQ,if the items are in stock. 2.Mixed orders and sample orders are also accepted If any other questions,please email us or send your inquiry details in the bottom! As we known as E-style rings, these rings have three prongs that make contact with the shaft and provide a wider shoulder than other external rings for a larger retaining surface. Use a side-mount retaining ring tool (sold separately) to push them into the groove from the side ...
-
OEM/ODM Supplier Din6799 - Parallel key din 68...
DIN6885 Parallel Pins Carbon Steel Flat Key 1) Material: carbon steel, stainless steel 2) Standard: DIN6885 3) Size: M6-M36 4) Surface treatment: natural color Keys DIN 6885 with loosening screw for combination shell end mill adapters About US Our company founded in 1998, is a set design, development, production, sale as a whole, professional production and operation of various types of industrial fasteners. Company provides: National standard (GB), British standard (BS), German standard (...
-
100% Original Stainless Steel Concrete Wedge An...
Metal Frame Anchor Top Quality Gb Standard Anchor Fasteners Details The frame anchor is a new type of high-efficiency fastener, which can firmly fix the machine, doors and windows, structural parts, equipment or various appliances on the wall, base or concrete foundation. Because of the advantages of using frame anchor, such as simple installation, firm fixation, efficient construction, etc., more and more industries choose window gecko as the first choice of fastening zero for correspo...
-
Manufacturing Companies for Self Tapping Screw ...
We supply different sizes and type self tapping screw. Stainless steel or galvanized carbon steel material. All kinds of diameter and length for customers to choose. Self Tapping Screw: Self-tapping screws have a wide range of tip and thread patterns, and are available with almost any possible screw head design. Common features are the screw thread covering the whole length of the screw from tip to head and a pronounced thread hard enough for the intended substrate, often case-hardened. For ...
-
Factory Cheap Hot Galvanized Hexagon Head Self-...
An acorn nut, also referred to as crown hex nut, blind nut, cap nut, domed cap nut, or dome nut (UK), is a nut that has a domed end on one side. When used together with a threaded fastener with an external male thread, the domed end encloses the external thread, either to protect the thread or to protect nearby objects from contact with the thread. In addition, the dome gives a more finished appearance. Acorn nuts are usually made of brass, steel, stainless steel (low carbon content) or nylon...
-
Best quality Self Tapping Screw - Black Phosph...
Drywall screw with black or gray color we can provide. Drywall Screw Introduction Its biggest feature in appearance is the shape of the horn, which is divided into two-line thin-tooth dry-wall screws and single-line thick-tooth dry-wall screws. The biggest difference between the two is the former. The thread is a double thread, suitable for the connection between gypsum board and metal keel with a thickness not exceeding 0.8mm, while the latter is suitable for the connection between gypsum b...
