100% Original Din472 Heavy Duty - Retaining rings for shafts Black Oxide Coating Din471 – Ruiye
100% Original Din472 Heavy Duty - Retaining rings for shafts Black Oxide Coating Din471 – Ruiye Detail:
Available Sizes: 8 mm to 400 mm
Standard Material: Carbon Spring Steel
Standard Finish: Phosphate and oil
Open these rings, pass them over the end of a shaft, and release to spring into the groove. Ring ID is measured with the ring uninstalled. Use retaining ring pliers (sold separately) to install and remove rings.
Spring steel rings are an economical choice with good strength. A black-phosphate finish is mildly corrosion resistant in dry environments. In wet environments, zinc yellow-chromate plated finishes have some corrosion resistance, and zinc-chromate plated finishes have good corrosion resistance.
Thrust load capacity, also known as PR, is based on using a shaft that is harder than the ring.
SURFACE FINISHES :Phosphates and oiled Blackened and oiled Manufacturer's choice
Version:Phosphated spring steel.
Bright stainless steel.Note:DIN 471 circlips are retaining rings mounted in a groove on a shaft OD. They withstand high axial forces between machine elements (e.g. bearings) and the groove in which the ring is mounted.Drawing reference:
Tapered section retaining rings decrease symmetrically from the center to the free ends, remaining circular when contracted or expanded within the limits of normal use. This assures contact with the groove along the entire periphery of the ring. These rings may be installed axially (horizontally along the center point of an axis) or radially (externally along the radius of a circle). Depending on the size of the ring in question, it may be manufactured in one of two ways:
- For smaller rings: using a Die and stamping on a Press from a coil of steel or copper
- For larger rings: wire forming, in which rectangular wire is coiled into the shape of the ring.
We have a large inventory of retaining rings in stock for immediate shipment to save you time and money.
Other Product
Product detail pictures:
Related Product Guide:
Cooperation
Always customer-oriented, and it's our ultimate goal to get not only by far the most reputable, trustable and honest supplier, but also the partner for our customers for 100% Original Din472 Heavy Duty - Retaining rings for shafts Black Oxide Coating Din471 – Ruiye , The product will supply to all over the world, such as: Sacramento, Lebanon, Madras, Our tenet is "integrity first, quality best". We have confidence in providing you with excellent service and ideal products. We sincerely hope we can establish win-win business cooperation with you in the future!
By Debby from Albania - 2018.11.06 10:04
The factory can meet continuously developing economic and market needs, so that their products are widely recognized and trusted, and that's why we chose this company.
By Joanna from Iran - 2017.07.28 15:46
Related products
-
Rapid Delivery for Concrete Nail - Mild Steel ...
Screw: A screw is a type of fastener, in some ways similar to a bolt , typically made of metal, and characterized by a helical ridge, known as a male thread (external thread). Screws are used to fasten materials by digging in and wedging into a material when turned, while the thread cuts grooves in the fastened material that may help pull fastened materials together and prevent pull-out. There are many screws for a variety of materials; those commonly fastened by screws include wood, sheet me...
-
OEM Supply 4pcs/3pcs Sleeve Anchor - Scale An...
Fish Scale Anchor Factory supply competitive price yellow zinc plated Scale Anchor Main Features It is a one tyoe of expansion anchor bolt. Size: M6-M12 avaliable Quality: Grate Grade: 4.8 Color: yellow or white color Usage: concrete, natural hard stone, fire equipment, air conditioner, exhaust duct, upside-down tube,curtain wall and ceiling etc. 1.Materials Our company has purchased steel from several large steel groups, such as Shougang Steel Mill, Handan Steel Mills whose steel have...
-
100% Original Factory Ss304 Stainless Steel Coi...
Linch pin: DIN11023, linch pin, Wire Lock Pins, lock pin Pins Material: Carbon Steel / Stainless Steel Wires Material: Spring Steel Surface treatment: Yellow zinc plated, zinc plated, plain, Reference M range: M4.5-M12 Reference Length: 30mm-90mm All size or produce according with your request Linch pins are commonly used in the agricultural industry for securing implements onto the three point hitch of a. Linch pins may also be used in place of an for securing hitch pins The safety ...
-
Fast delivery Allen Bolt - Customized U bolt &...
U-shaped bolts are riding bolts Product Description The English name of the riding bolt is U-bolt. It is a non-standard part. The shape is U-shaped, so it is also called a U-bolt. Both ends have threads to be combined with nuts. They are mainly used to fix tubular objects such as water pipes. Or a sheet-like object, such as a leaf spring of a car, is called a riding bolt because it fixes things like a person rides on a horse. U type is generally used in trucks, it is used to stabilize t...
-
2019 Good Quality Din 571 Hex Head Wood Screw -...
Available Sizes: 8 mm to 400 mm Standard Material: Carbon Spring Steel Standard Finish: Phosphate and oil Open these rings, pass them over the end of a shaft, and release to spring into the groove. Ring ID is measured with the ring uninstalled. Use retaining ring pliers (sold separately) to install and remove rings. Spring steel rings are an economical choice with good strength. A black-phosphate finish is mildly corrosion resistant in dry environments. In wet environments, zinc yellow-chroma...
-
Discountable price Slotted Spring Pin Productio...
Size:M8-M30 Samples: Samples is Free, 1.There is no MOQ,if the items are in stock. 2.Mixed orders and sample orders are also accepted If any other questions,please email us or send your inquiry details in the bottom! As we known as E-style rings, these rings have three prongs that make contact with the shaft and provide a wider shoulder than other external rings for a larger retaining surface. Use a side-mount retaining ring tool (sold separately) to push them into the groove from the side ...
